7000001328

3M™ silane glass treatment AP115 is an IPA based silane glass treatment that is used in conjunction with 3M™ VHB™ tape to promote adhesion. It is easy to apply using the 4 fl-oz. Spray bottle and is also available in a 1 gal bulk bottle. It is clear in color. 3M™ silane glass treatment AP115 is a solvent mixture of isopropyl alcohol and water that is used to increase adhesion of 3M™ VHB™ tapes to uncoated glass surfaces. Glass surfaces are water loving in nature, which can cause issues in humid or wet environments when attempting to create a strong, long lasting adhesive bond. Moisture can undercut the tape bondline and interfere with normal adhesion forces. 3M™ silane glass treatment AP115 creates a hydrophobic surface that protects the 3M™ VHB™ tape and bonds in even the most moist environments. Easy to apply and clear in color. Recommended applications - glass treatment in wet or humid environments, construction industry. Moisten a clean, soft absorbent, lint-free cloth with the silane solution (or spray solution onto surface) and wipe the area to be bonded in one direction. Immediately follow with a dry lint-free cloth (two-cloth method). A thin "mono-layer" of the silane solution gives the best results. The glass should be completely dry with no film residue visible.* under normal room temperature conditions it is best to wait 1 to 2 min before applying the tape so that any residual moisture can evaporate. Apply 3M™ VHB™ tape within 15 min after treating the surface to minimize the risk of recontamination of the surface.